| 单价 | 价格面议 | 最小订货数 | 100 |
| 运输费用 | Price Negotiable | 商品成色 | New |
| 地址 | 是否提供样品 | yes | |
| 发布时间 | 2012-05-10 14:59 | 发布者 | 济宁迅大管道防腐材料有限公司 |
| 支付方式 | |
| 涉及行业 |
化工
>胶粘剂
建筑和装饰材料 >密封料 建筑和装饰材料 >防水材料 冶金矿产和能源 >耐腐蚀材料 |
1. Preparation
Denso Flashing Tape must only be applied to clean dry surfaces. Remove all loose dust and dirt with a wire brush and soft broom from the area of application.
2. Application
a.) Measure length of Denso Flashing Tape required and cut from the roll.
b.) Peel a short length (about 4 inches) of the release film from one end of the length of tape. c.) Position this end (compound side down) onto the dry primed surface and press down firmly with hand or roller.
d.) Ensure the tape is evenly pressed down avoiding creases or air pockets. It is very important to press down the edges and ends of the tape.
e.) Continue along the length of tape peeling off approximately 8 to 12 inches of release film as application proceeds. It is recommended that only short lengths of release film are removed at any time to avoid contamination of the compound with dirt and dust.
It can be used for Doors & Windows , Roof Patch ,Gutter Patch, Skylights, Valley Repair ,Metal Patch Metal Roofs, Flat Roofs, Trucks, RV’s ,Mobile Homes, Trailers. Besides ,it also could be used for Exposed steel pipelines


